U.P Bricks supplies 10mm Jeera Rodi Aggregate for residential, commercial and infrastructure construction requirements. Also known as 10mm stone aggregate or coarse aggregate, Jeera Rodi consists of small crushed stone particles used in suitable concrete mixes and other construction applications. Buyers can enquire about current pricing, material availability, quantity requirements and delivery to their project location across Delhi NCR.
Whether you are a contractor, builder, property developer, civil engineer or individual homeowner, selecting the correct aggregate size and quality is important for construction performance. The required grading, cleanliness and suitability should be confirmed according to the intended application and project specifications.
10mm Jeera Rodi is a small-sized crushed stone aggregate used in construction. Its relatively small particle size can make it suitable for concrete work where the mix design and reinforcement spacing require smaller aggregate particles. The term “Jeera Rodi” is commonly used in local construction-material markets to describe small stone chips.
Actual particle-size distribution, stone source, grading and test results can vary by supply. Buyers should confirm these details before placing an order, particularly when the material is intended for structural concrete.
| Specification | Details |
|---|---|
| Product Name | 10mm Jeera Rodi Aggregate |
| Material Type | Crushed stone aggregate |
| Nominal Size | 10mm |
| Typical Colour | Natural grey; may vary by stone source |
| Material Form | Small stone chips |
| Common Application | Suitable concrete mixes and other specified construction work |
| Exact Grading | Confirm with supplier |
| Stone Source | Confirm with supplier |
| Crushing and Impact Values | Confirm through applicable test reports |
| Water Absorption | Confirm through material test results |
| Supply Quantity | Confirm current minimum order and available load sizes |
| Price | Depends on quantity, location, freight and current availability |
Note: These are product-identification details, not a certified technical data sheet. Request relevant test reports when the aggregate is required for structural or specification-controlled work.
10mm aggregate may be used in concrete mixes where the specified grading and nominal size are suitable. The final selection should follow the approved mix design and applicable project requirements.
Smaller aggregate can be appropriate for certain reinforced-concrete members, particularly where reinforcement spacing and member dimensions require it. Use only the aggregate size approved by the structural engineer and concrete mix designer.
House construction projects may require different aggregate grades for foundations, columns, beams, slabs, floors and other concrete components. Confirm whether 10mm Jeera Rodi is appropriate for each intended use.
Commercial projects can require planned aggregate procurement for concrete work, floor construction and other civil activities. Buyers should confirm the required grade, quantity and delivery schedule before dispatch.
Contractors can enquire about bulk aggregate supply for ongoing projects. Coordinating material quantities and unloading arrangements can help reduce site delays.
10mm aggregate may be suitable for other applications when the project specification permits it. Do not assume that the same aggregate is suitable for every foundation, road, paving or concrete application.
Before accepting a delivery, buyers and site supervisors should check the material against the purchase order and approved project specifications.
Visual inspection alone cannot establish whether aggregate meets all structural requirements. Laboratory testing and approval by the responsible engineer may be necessary.
| Comparison | 10mm Jeera Rodi | 20mm Gitti Aggregate |
|---|---|---|
| Nominal Size | 10mm | 20mm |
| Particle Size | Smaller stone chips | Larger stone particles |
| Potential Application | Concrete mixes requiring smaller aggregate | Many conventional concrete applications, subject to specification |
| Selection Criteria | Mix design, reinforcement spacing and member dimensions | Mix design, member dimensions and project requirements |
| Price Comparison | Obtain a current delivered quote | Obtain a current delivered quote |
Neither size is automatically better for every project. Aggregate size must be selected according to the concrete mix design, applicable standards and instructions from the responsible engineer.
Explore 20mm Gitti Aggregate for another commonly requested construction aggregate size.
The price of 10mm Jeera Rodi can depend on the material source, order quantity, loading arrangements, transport distance, delivery access and current market conditions. The final delivered cost may differ between Delhi, Gurgaon, Noida, Ghaziabad and other locations.
For an accurate quotation, share your site location, required quantity and intended application with U.P Bricks. Confirm the unit of sale, freight, applicable taxes, unloading arrangements and payment terms before finalising the order.
Aggregate quantity depends on the dimensions of the work, the specified concrete mix and the project's material-estimation method. For concrete work, the finished concrete volume is calculated first, and the aggregate requirement is then determined from the approved mix design or estimation method.
Basic volume formula:
Volume = Length × Width × Thickness
Use consistent units. For example, when all dimensions are in metres, the result is in cubic metres. This volume represents the geometric volume of the work, not the final aggregate quantity to order.
For structural concrete, use the approved mix design or the engineer's bill of quantities instead of assuming that one cubic metre of finished concrete equals one cubic metre of loose aggregate.
U.P Bricks serves construction-material enquiries for residential, commercial and contractor requirements across Delhi NCR. Buyers planning larger orders should provide their expected consumption, required delivery dates and site access details so the supply arrangement can be discussed before dispatch.
For repeat orders, confirm the consistency of grading, accepted quality criteria, delivery frequency, invoice requirements and the procedure for handling material that does not meet the agreed specification.
Enquire about aggregate availability and delivery to your construction site in the following locations:
Availability, delivery coverage and freight should be confirmed for the exact site address and order quantity.
Explore other construction materials that may be required for your project:
It is a small-sized crushed stone aggregate commonly used in construction where a 10mm nominal aggregate size is specified.
It is often natural grey, although the exact colour depends on the source stone.
It may be used in concrete mixes and other specified construction work where its grading and size are appropriate.
It can be used where permitted by the approved concrete mix design and structural specifications. Confirm suitability with the engineer.
No. The appropriate size depends on slab thickness, reinforcement spacing, concrete mix design and project specifications.
The principal difference is nominal particle size. The appropriate choice depends on the intended concrete application and approved design.
The term is commonly used in local markets for small stone chips. Exact grading and material characteristics should be confirmed with the supplier.
Check grading, cleanliness and consistency, and request relevant laboratory test reports when required by the project.
Yes. Aggregate grading, strength, cleanliness, shape and other properties can influence concrete performance alongside cement, water, mix proportions and workmanship.
The price depends on the current material rate, quantity, delivery location, freight and order conditions. Request a current quotation.
Not necessarily. Confirm whether the quotation is ex-loading-point or delivered to your site.
You can enquire about the quantity required for your house project and confirm available order and delivery arrangements.
Yes. Share the required quantity, location, schedule and material specification for a bulk-order enquiry.
Only when the specified concrete mix and foundation design permit it. Follow the structural engineer's instructions.
Suitability depends on the particular road layer, grading requirements and approved construction specification.
Calculate the work volume from its dimensions, then use the approved mix design or bill of quantities to determine aggregate demand.
You can enquire about the availability of related materials, including Jamuna Sand and White Dust.
Ask the supplier about available test reports and confirm any documentation required by your project before ordering.
U.P Bricks accepts enquiries for construction-material requirements across Delhi NCR. Delivery to a particular location depends on availability, quantity and logistics.
Use the WhatsApp link below to share your site location, required quantity and intended application so that current pricing and supply details can be discussed.
For 10mm Jeera Rodi Aggregate enquiries, contact U.P Bricks to discuss current rates, quantity, material requirements and delivery arrangements.
Visit U.P Bricks to explore more construction materials and product categories.
